What should be paid attention to when operating SMT Mounter?

SMT Mounter as a high-tech product, safe correct operation of the machine people are very important.

The most basic thing to operate the SMT machine safely is that the operator should have the most accurate judgment follow the following basic safety rules:

1. The SMT Mounter machine operator shall receive the operation training under the correct method.

2. Check the SMT Mounter machine, turn off the power supply when replacing parts repairing internal adjustment (the maintenance of the machine must be carried out under the condition of pressing the emergency button cutting off the power supply).

3. Make sure that ypu (programming part) is in your hand to stop the machine at any time when reading coordinate adjusting the machine.

4. Make sure that the "interlock" safety equipment is kept effective to stop the machine at any time, the safety detection on the machine can be skipped short circuited, otherwise personal machine safety accidents will easily occur.

5. Only one operator is allowed to operate one SMT machine during production.

6. During operation, make sure that all parts of the body, such as hands heads, are outside the moving range of the machine.

7. SMT Mounter machine must have correct grounding (real grounding, neutral line).

8. Do use the machine in the environment with burning gas extremely dirty environment.

Be careful:

a) Those who have received SMT placement machine training are allowed to operate on the machine.

b) The operation equipment shall be safety oriented, the machine operator shall operate the machine in strict accordance with the operation specifications, otherwise the machine may be damaged personal safety may be endangered.

c) SMT Mounter machine operators should be careful.